An interventional study of 3D-printed scoliosis brace in Scoliosis Idiopathic Adolescent Treatment, sponsored by Baylor College of Medicine. Recruiting at 2 sites in United States. Open to participants aged 8 Years to 18 Years. Per ClinicalTrials.gov, last updated 2026-06-02.
Sponsored by Baylor College of Medicine · Not applicable, Interventional, and Device feasibility
Help build ClinicalTrials.gg — short surveys, remote interviews or testing, in your language. Take part →
Among 153 studies in Scoliosis with a site in United States — 42 open to participants now, 51 under way, 2 of them phase 3. Scoliosis · United States.
Among the 153 studies in Scoliosis with a site in United States, this one is the 84th largest by planned enrollment of the 91 interventional ones that give a count, is one of 9 that started in 2025, is one of 65 with no phase, reaches primary completion later than 13 of the 50 other live ones, and was the 141st registered.
660 studies on the registry are indexed under Scoliosis; 185 are open to participants now.
Browse Scoliosis studies →42 of the 153 studies in Scoliosis with a site in United States are open now. Recruiting first, the newest first:
Children's Hospital Medical Center, Cincinnati · Sites in United States
Ages 14–26
Thinks Works, PBC · Sites in United States
Ages 9–16
Columbia University · Sites in United States
Ages 10–19
Senthil Sadhasivam · Sites in United States
Ages 10–18
Children's Hospital Los Angeles · Sites in United States
Ages 8–18
A study can be open while its sites in United States have not opened yet or have stopped. Only those recruiting at a site in United States →
Of the 117 Scoliosis studies recruiting now, 23 (20%) set no upper age limit and 88 (75%) stop at 75 or younger; 98 take children under 18; 14 take healthy volunteers.
This study: 8 Years to 18 Years · all sexes · no healthy volunteers.
The full table on the hub →This tab as a report to print or save as PDF → With an account.
153 studies; the count open now beside each. This study's row is marked.
A study in two phases is counted once above. Listed by phase, each with its combined phases: Phase 1 2 · Phase 2 6 · Phase 3 6 · Phase 4 15
First in 1998; this study’s year is marked. 9 started in 2025.
By drug class, each counting the studies that test any of its medicines:
This study's planned enrollment of 5 is below the median of 45 across 386 interventional studies indexed under Scoliosis.
Median enrollment 58 across the 91 interventional studies, 100 across the 62 observational. Of the 85 that completed or were terminated, 35 (41%) have results posted.
This tab as a report to print or save as PDF → With an account.
24 of 153 have an industry lead sponsor. The 10 most frequent:
Baylor College of Medicine is the lead sponsor of 747 studies on the registry; 110 are open to participants now.
Of its 84 completed or terminated interventional studies of FDA-regulated products, 45 (54%) have results posted.
Baylor College of Medicine has 2 studies filed under Scoliosis — fewer than ten, so there is no comparison to draw.
20 of the studies in Scoliosis with a site in United States that are under way reach primary completion within a year, 1 of them phase 3. Phase 3 first, then by date:
| Study | Primary completion |
|---|---|
| NCT07217873Phase 3Columbia UniversityIntraVenous Iron in Kids With Iron Deficiency and Scoliosis Study | 2027-08-31 |
| NCT00738439International Spine Study Group FoundationProspective, Multi-Center Adult Spinal Deformity Outcomes Database Registry | 2026-12 |
| NCT06910228Joseph D. TobiasChanges in Cerebral Oxygenation Related to Intraoperative Position Changes | 2026-12 |
| NCT06365892University of California, San FranciscoOpen-label Placebo (COLP) for Pain in Adolescent Idiopathic Scoliosis (AIS) Surgery+Surgical Treatment of Idiopathic Scoliosis | 2026-12 |
| NCT03017755Mayo ClinicScoliosis Survey to Development Treatment Decision Tool | 2026-12-01 |
Add all 20 to your calendar (.ics) → With an account.
Among the 153 studies in Scoliosis with a site in United States, from their registry updates:
This tab as a report to print or save as PDF → With an account.
Scoliosis bracing is an effective treatment method for idiopathic scoliosis, but only if worn consistently for many hours a day. Unsurprisingly, brace discomfort is a significant deterrent against treatment adherence. For decades, custom braces for idiopathic scoliosis have been fabricated using one of three materials - copolymer, polypropylene, or polyethylene. The application of the biomechanical principles behind bracing have improved over the years, but the materials have not. The investigators' goal is to expand fabrication options by testing a 3D-printed scoliosis brace with variable flexibility. The aim is to improve patients' perceived brace comfort.
After optimizing the brace design, the investigators will collect patient feedback about the design from currently braced participants. These participants understand what a standard brace feels like and will provide impactful feedback.
After optimizing the brace design, the investigators will collect patient feedback about the design from currently braced participants. Once a participant enrolls in the study, the 3D printed brace will be made using the exact same shape as their current brace. The standard fabrication process includes the following:
These steps were already completed to make the participant's current brace, which has been deemed acceptable by their medical team, including the PI and Dr. Timothy Borden. To reduce the number of variables present, the 3D printed brace will be made using the exact same shape as their current brace. The only difference is the fabrication technique (step 4). Instead of carving a foam mode and thermoforming, the exact brace shape will be directly 3D printed. Therefore, no additional x-rays, scans, or measurements are required from the participants. The standard fabrication process and research activities are outlined in attachment titled "Fabrication Process Outline."
Once the 3D printed brace has been fabricated, the participant will come in to be fit with the brace. A standard fitting involves trimming the brace, adding straps, heating and flaring to improve comfort, and potentially adding padding. The PI is a scoliosis bracing specialist and will be the lead orthotist during the fitting process to ensure that best practices are followed.
Following the fitting, the participant will provide test out the 3D printed brace for comfort by performing a series of tasks. The activities will include the following: sitting in a chair, picking an item up from the floor while standing, picking an item up from the floor while sitting, stepping onto a stool, jogging in place for 10s, performing the hula hoop Wii-fit game, lying down on an exam table, and donning shoes. All data collection will take place via the survey platform Qualtrics.
If the participants feel comfortable in the brace and pass a skin check, the participants will then take the brace home and wear it for 1 week. They will return for the 1-week follow-up appointment and complete the study at this time. They will provide feedback about the 3D printed brace through a semi-structured interview (recorded using BCM Zoom Platform) and complete a survey (Qualtrics). They will return the brace, marking the end of the study.
Total duration of study participation ranges from 2 weeks - 6 weeks. The time commitment required from the participant is no more than 8 hours. The timelines are outlined below:
Standard of care will be maintained throughout the study. The only activities outside of the standard of care are the semi-structured interview, study surveys, and performance of tasks. While the goal of the study is to elevate the 3D printed materials, the investigators will still be following the standard of care for 3D printing.
Go through the criteria one by one — yes, no or not sure — and take the list to your doctor or the study team. Kept in this browser only.
Exclusion Criteria:
Enrolled participants will be fit with a 3D printed brace. The brace will be made using the exact same shape as their current brace. The fitting procedures will also remain the same.
Device: 3D-printed scoliosis brace
Scoliosis brace will be 3D printed using a Filament Innovations Icarus printer and the material CPX. There will be corrugations where extra strength is needed. The brace will be made using the same shape as the participant's current brace to minimize variables at play. According to Sec. 890.3490 of the Code of Federal Regulations Title 21, scoliosis braces are Class I devices, requiring only general controls. This device is exempt from the premarket notification procedures in subpart E of part 807 of this chapter, subject to the limitations in § 890.9. The device is also exempt from the current good manufacturing practice requirements of the quality system regulation in part 820 of this chapter, with the exception of § 820.180, regarding general requirements concerning records and § 820.198, regarding complaint files.
Perceived brace comfort
Participants will complete a series of tasks (sitting down, putting shoes on, stepping onto stool, etc.) in their current brace and in the 3D-printed scoliosis brace. Each task will be completed three times and researchers will be blinded to participant responses. A Wilcoxon signed-rank test will compare 3D printed brace comfort to baseline measures.
Time frame: Comparing baseline comfort measures at enrollment (current brace) to comfort measures in 3D-printed brace at fitting (roughly 4 weeks after enrollment)
Semi-structured interview
A semi-structured interview will be performed to understand the differences between the two braces. Systematic coding procedures (e.g., open, axial, and selective coding) will be conducted by the research team.
Time frame: Conducted at one-week follow-up appointment
Survey about perceived brace fit and comfort
Participants will answer a survey about their experience during the one-week trial with the 3D-printed brace. The survey will ask about comfort, preferences, design, etc.
Time frame: Completed at one-week follow-up appointment
Not enrolling at this site.
Plan to share: Undecided
Started Apr 2025 (actual). Primary completion is estimated for Oct 2026, 18 months after the start.
Of 224 non-industry interventional studies with no phase under Scoliosis, half reached primary completion within 21 months of starting (the median), counting those still running; a quarter within 8 and three quarters within 58. This study's planned 18 months is below that.
Counting every sponsor, half of 234 studies reached it within 22 months; a quarter within 8 and three quarters within 60.
How these figures are worked out, and which studies are left out of them.
Eligibility is decided by the study team. Share this record with your doctor or contact the team directly.
Contact study teamGet an email when the registry record changes — status, dates, results — or when someone posts here.
Sign in to followQuestions and observations about this study, from anyone following it. Not medical advice, and not a channel to the study team — their contact details are on the registry record.
Sign in to join the discussion. Reading takes no account; posting does. You choose a display name, and a pseudonym is the default.
Nothing here yet. If you are running this trial, taking part in it, or weighing whether to, this is the place to say so.