An interventional study of Occlusal splints manufactured with fully digital workflow. and Occlusal splints manufactured with Conventional workflow in Temporomandibular Joint Disorders, sponsored by Cairo University. Not yet recruiting. Open to participants aged 18 Years to 40 Years. Per ClinicalTrials.gov, last updated 2025-05-22.
Sponsored by Cairo University · Not applicable, Interventional, and Treatment
Help build ClinicalTrials.gg — short surveys, remote interviews or testing, in your language. Take part →
Among 30 studies in Temporomandibular Joint Disorders by Cairo University — 8 open to participants now, 9 under way, none of them phase 3. Temporomandibular Joint Disorders · Cairo University.
Among the 30 studies in Temporomandibular Joint Disorders by Cairo University, this one is the 7th largest by planned enrollment of the 21 interventional ones that give a count, is one of 4 that started in 2025, is one of 20 with no phase, and was the 24th registered.
593 studies on the registry are indexed under Temporomandibular Joint Disorders; 149 are open to participants now.
Browse Temporomandibular Joint Disorders studies →8 of the 30 studies in Temporomandibular Joint Disorders by Cairo University are open now, in 1 country. Recruiting first, the newest first:
Cairo University · Sites in Egypt
Ages 18–65
Cairo University · Sites in Egypt
Ages 18–40
Cairo University · Sites in Egypt
Ages 18–50 · Healthy volunteers
Cairo University · Sites in Egypt
Ages 18+
Cairo University
Ages 16–50 · Healthy volunteers
By country, each count listing its studies:
Of the 76 Temporomandibular Joint Disorders studies recruiting now, 26 (34%) set no upper age limit and 46 (61%) stop at 75 or younger; 7 take children under 18; 23 take healthy volunteers.
This study: 18 Years to 40 Years · all sexes · no healthy volunteers.
The full table on the hub →This tab as a report to print or save as PDF → With an account.
30 studies; the count open now beside each. This study's row is marked.
First in 2015; this study’s year is marked. 4 started in 2025.
This study's planned enrollment of 32 is below the median of 45 across 417 interventional studies indexed under Temporomandibular Joint Disorders.
Median enrollment 29 across the 21 interventional studies, 200 across the 9 observational. Of the 11 that completed or were terminated, 0 (0%) have results posted.
This tab as a report to print or save as PDF → With an account.
Cairo University is the lead sponsor of 4,967 studies on the registry; 1,474 are open to participants now.
Of its 37 completed or terminated interventional studies of FDA-regulated products, 5 (14%) have results posted.
2 of the studies in Temporomandibular Joint Disorders by Cairo University that are under way reach primary completion within a year, 0 of them phase 3. Phase 3 first, then by date:
| Study | Primary completion |
|---|---|
| NCT07614932Cairo UniversityArthroscopic Lysis and Lavage With and Without Intra-articular Injection of Hyaluronic Acid in Patients With DDwoR in TMJ | 2027-01 |
| NCT07486609Cairo UniversityDiagnostic Study Accuracy of Jaw Motion Analyzer(JMA) Versus Research Diagnostic Criteria(RDC/TMD) and Magnetic Resonance Imaging(MRI) for Temporomandibular Disorders Among Patients With Chronic Orofacial Pain. | 2027-01-01 |
Add all 2 to your calendar (.ics) → With an account.
Among the 30 studies in Temporomandibular Joint Disorders by Cairo University, from their registry updates:
This tab as a report to print or save as PDF → With an account.
According to published literatures, the prevalence of TMD is approximately 10% in patients over 18 years of age with a considerable proportion being women of reproductive age. The treatment of TMD presents the following goals: decreasing joint and masticatory muscle pain, increasing the range of motion in the mandible, preventing degenerative changes in the articulating tissues. Management of TMD can be either conservative or surgical treatments, the conservative treatments include analgesia, medications, physical therapy, occlusal adjustment, splint therapy, localized steam application, and external muscle massage. The occlusal splint therapy is considered a common treatment option for TMD management. Flat stabilization splint is the preferred splint for such cases. It is designed to promote occlusal stability and decrease muscles tension by altering occlusion and allowing complete seating of the condyle in centric relation.
The evolution of digital technology created new era of dentistry that successfully digitalized the traditional workflow of occlusal splints including designing and manufacturing. Furthermore, virtual facebow and dynamic jaw relation record using jaw tracking device are another digital reward. The digital workflow can offer more predictable approach for occlusal splint construction, It could eliminate the traditional technical errors and enhance the occlusal accuracy
The traditional workflow of occlusal splints includes, primary impression for both arches, pouring casts, patient deprogramming and centric jaw relation record followed by mounting. Then the occlusal splint is made out of a resin that includes wax pattern fabrication on surveyed and mounted casts to be invested finally to form a clear, heated-cured acrylic resin splint. After that, it is trimmed, polished, and seated back on the duplicate of the invested casts. It is a complicated process and time- consuming constructed followed by occlusal adjustments on the articulator. That traditional approach is time consuming and prone to many technical errors. Such errors are reflected in occlusal discrepancies that are considered critical for the effectiveness of occlusal splint therapy.
Recent advancements in the field of intra-oral scanning (IOS), jaw tracking device for digitally recording the maxillomandibular relationship, maximum intercuspation, centric occlusion and the patient's mandibular motion. This technique incorporates the mandibular motion into the 3-dimensional (3D) virtual patient representation to integrate the 3D dynamic virtual patient visualization and computer-aided design/computer-aided manufacturing (CAD/CAM) may have the potential to compensate for some of the shortcomings of conventional splint therapy and deliver improved clinical results, while simplifying the workflow. Several studies have shown the improved quality and material properties of CAD/CAM splints in comparison to conventional ones, but little of them reported fully digital workflow starting from scanning of maxillary and mandibular teeth, using jaw tracking device to obtain personalized condylar motion parameters and individualized maxillary position to better simulate the actual movement of the patient in the laboratory (Revilla, Marta etal,2022) and Computer-aided design/computer-aided manufacturing (CAD/CAM) in final production of occlusal splints all of these fully digital steps may be possibly reducing the adjustment time for occlusal devices and achieving predictable efficacy.
This study aims to compare the difference, if present in patient satisfaction and the amount of occlusal adjustments in occlusal splints fabricated using fully digital versus conventional workflow.
Go through the criteria one by one — yes, no or not sure — and take the list to your doctor or the study team. Kept in this browser only.
Exclusion Criteria:
For the comparator group, maxillary and mandibular impressions will be made with alginate impression material, models will be poured with gypsum, facebow (Bio-art) record and interocclusal registrations will be recorded at centric by using bite registration material after patient deprogramming with Lucia jig. The models will be mounted in a semi-adjustable articulator, wax pattern fabrication on surveyed and mounted casts to be invested finally to form a clear, heated-cured acrylic resin splint
Device: Occlusal splints manufactured with Conventional workflow
The intervention involves the fabrication of 3D printing of occlusal splint with fully digitalization technique by the aid of Jaw Tracing Device (Zebis JMA, Germany). The acquisition and scanning of the patients are done by using an intra oral scanner (Medit i700, South Korea) and designing them using a designing software (Exocad, USA). This device will be printed with a 3D printer (Anycubic) utilizing printable resin material
Device: Occlusal splints manufactured with fully digital workflow.
The intervention involves the fabrication of 3D printed occlusal splint with fully digitalization technique by the aid of Jaw Tracing Device. The acquisition and scanning of the patients are done by using an intra oral scanner and designing them using a designing software. This device will be printed with a 3D printer utilizing printable resin material
For the comparator group, maxillary and mandibular impressions will be made with Cavex CA37 alginate impression material (Cavex Holland B.V, Holland), models will be poured with gypsum (Kimberlit, Type IV Dental Stone, Protechno Spain), facebow (Bio-art) record and interocclusal registrations will be recorded at centric by using bite registration material after patient deprogramming with Lucia jig. The models will be mounted in a semi-adjustable articulator (Bio-art, A7Plus, Brazil), wax pattern fabrication on surveyed and mounted casts to be invested finally to form a clear, heated-cured acrylic resin splint
Patient satisfaction
Primary outcome: patient satisfaction will be recorded using Numeric scales (TMD/NS, 10 cm), this questionnaire includes the following aspects; headaches, face pain, jaw joint pain, jaw joint noises, mastication pain, neck pain, face tension, limitation of mouth opening, complaints during mastication, and teeth sensitivity at baseline and then after 1 and 3 months. The questioner was translated into Arabic language to be understood by the patients.
Time frame: '' Up to 12 weeks''
Amount of occlusal adjustments
Secondary outcome: amount occlusal adjustments (representing 3-dimensional volumetric changes). After finishing of occlusal device, it will be scanned with the scanner (pre-adjustment scan). The scanning will be repeated after adjustment of the occlusal device by the clinician (post-adjustment scan). The STL files of both the pre and post adjustments scans for each occlusal device will be imported to Medit link and the two scans will be superimposed by the "best fit alignment" and "3D compare" functions will be carried out to measure the amount of intraoral occlusal adjustments (in mm) that was performed
Time frame: Base line or day 1
No study locations are listed for this record.
Plan to share: No — I am not going to share the IPD for privacy and security of the information.
No publications or documents are linked to this record.
Start is estimated for Jul 2025; primary completion for Oct 2025, 3 months later.
Of 244 non-industry interventional studies with no phase under Temporomandibular Joint Disorders, half reached primary completion within 11 months of starting (the median), counting those still running; a quarter within 5 and three quarters within 21. This study's planned 3 months is below that.
Counting every sponsor, half of 248 studies reached it within 11 months; a quarter within 5 and three quarters within 21.
How these figures are worked out, and which studies are left out of them.
This study is not yet recruiting, as verified in Apr 2025. You cannot join it, but the record below documents what was studied.
Get an email when the registry record changes — status, dates, results — or when someone posts here.
Sign in to followQuestions and observations about this study, from anyone following it. Not medical advice, and not a channel to the study team — their contact details are on the registry record.
Sign in to join the discussion. Reading takes no account; posting does. You choose a display name, and a pseudonym is the default.
Nothing here yet. If you are running this trial, taking part in it, or weighing whether to, this is the place to say so.
Temporomandibular Joint Disorders →