An interventional study of onlay manufactured by milling and Onlay manufactured by 3D printing in Caries,Dental, Broken Teeth and Fracture Tooth, sponsored by Ain Shams University. Enrolling by invitation at 1 site in Egypt. Open to participants aged 18 Years to 50 Years, including healthy volunteers. Per ClinicalTrials.gov, last updated 2026-04-06.
Sponsored by Ain Shams University · Not applicable, Interventional, and Treatment
Help build ClinicalTrials.gg — short surveys, remote interviews or testing, in your language. Take part →
Among 17 studies in Dental Caries by Ain Shams University — 5 open to participants now, 7 under way, none of them phase 3. Dental Caries · Ain Shams University.
Among the 17 studies in Dental Caries by Ain Shams University, this one is the 12th largest by planned enrollment of the 15 interventional ones that give a count, is one of 4 that started in 2024, is one of 12 with no phase, and was the 7th registered.
1,176 studies on the registry are indexed under Dental Caries; 209 are open to participants now.
Browse Dental Caries studies →5 of the 17 studies in Dental Caries by Ain Shams University are open now, in 1 country. Recruiting first, the newest first:
Ain Shams University · Sites in Egypt
Ages 15–25
Ain Shams University · Sites in Egypt
Ages 6–8 · Healthy volunteers
Ain Shams University · Sites in Egypt
Ages 4–8 · Healthy volunteers
Ain Shams University · Sites in Egypt
Ages 4–8 · Healthy volunteers
By country, each count listing its studies:
Of the 86 Dental Caries studies recruiting now, 18 (21%) set no upper age limit and 66 (77%) stop at 75 or younger; 60 take children under 18; 53 take healthy volunteers.
This study: 18 Years to 50 Years · all sexes · healthy volunteers too.
The full table on the hub →This tab as a report to print or save as PDF → With an account.
17 studies; the count open now beside each. This study's row is marked.
First in 2018; this study’s year is marked. 4 started in 2024.
This study's planned enrollment of 30 is below the median of 60 across 967 interventional studies indexed under Dental Caries.
Median enrollment 40 across the 15 interventional studies, 276 across the 2 observational. Of the 9 that completed or were terminated, 0 (0%) have results posted.
This tab as a report to print or save as PDF → With an account.
Ain Shams University is the lead sponsor of 1,958 studies on the registry; 432 are open to participants now.
Of its 35 completed or terminated interventional studies of FDA-regulated products, 0 (0%) have results posted.
1 of the studies in Dental Caries by Ain Shams University that are under way reach primary completion within a year, 0 of them phase 3. Phase 3 first, then by date:
| Study | Primary completion |
|---|---|
| NCT05943782Ain Shams UniversityEvaluation of CAD/CAM Onlays Fabricated by Subtractive Versus Additive Digital Manufacturing Techniques. | 2026-12-01 |
Add it to your calendar (.ics) → With an account.
Among the 17 studies in Dental Caries by Ain Shams University, from their registry updates:
This tab as a report to print or save as PDF → With an account.
Aim of the study: The aim of this RCT is to evaluate CAD/CAM onlays fabricated by subtractive technique (brilliant crios) versus additive technique (varseosmile crown plus material), in terms of clinical functional evaluation following the FDI criteria and three-dimensional digital evaluation of the marginal and internal fit by triple scan protocol.
Materials and methods: A total of 30 patients will be enrolled in the clinical trial following the eligibility criteria. Then, the patients will be randomly allocated to receive either 3D printed onlays or milled ones. A blinded operator will prepare a standardized cavity for the restoration and an impression will be performed. After designing the restoration on the Exocad software, A dentist not involved in the clinical part of the study will receive the STL file of the design and envelopes containing the information necessary only to manufacture the restorations (tooth numbers and restorative materials) to proceed with either the milling or printing procedures. Try in and cementation procedures will be similarly performed for both groups by a blinded operator. Finally, the marginal and internal fit will be evaluated by using the triple scan protocol for digital 3D assessment.
Also, a baseline, six months and 12 months assessments will be performed by a blinded examiner, not involved in the clinical part for assessing the functional clinical performance of the re3stprations using the FDI criteria. Finally, the data will be statistically analyzed.
Statement of the problem: Several randomized clinical trials (RCT) investigated the clinical performance of milled ceramic and composite posterior indirect adhesive restorations. However, none investigated that of 3D printed ones and the differences in their fabrication process and material properties of these restorations may impact their clinical performance. Therefore, clinical assessment of that novel additive technique is required.
Aim of the study: The aim of this RCT is to evaluate CAD/CAM onlays fabricated by subtractive technique (brilliant crios) versus additive technique (varseosmile crown plus material), in terms of clinical functional evaluation following the FDI criteria and three-dimensional digital evaluation of the marginal and internal fit by triple scan protocol.
Materials and methods: A total of 30 patients will be enrolled in the clinical trial following the eligibility criteria. Then, the patients will be randomly allocated to receive either 3D printed onlays or milled ones. A blinded operator will prepare a standardized cavity for the restoration and an impression will be performed. After designing the restoration on the Exocad software, A dentist not involved in the clinical part of the study will receive the STL file of the design and envelopes containing the information necessary only to manufacture the restorations (tooth numbers and restorative materials) to proceed with either the milling or printing procedures. Try in and cementation procedures will be similarly performed for both groups by a blinded operator. Finally, the marginal and internal fit will be evaluated by using the triple scan protocol for digital 3D assessment.
Also, a baseline, six months and 12 months assessments will be performed by a blinded examiner, not involved in the clinical part for assessing the functional clinical performance of the re3stprations using the FDI criteria. Finally, the data will be statistically analyzed.
Go through the criteria one by one — yes, no or not sure — and take the list to your doctor or the study team. Kept in this browser only.
Exclusion Criteria:
Underlined terms in the criteria open these too. Explained by clinicaltrials.gg, not part of the registry record. The study team decides who can take part.
Before you join, the study team explains what taking part involves — its purpose, what happens, the risks and possible benefits — and answers your questions, so you can decide freely. Consent is usually recorded on a form (the informed consent form, ICF) signed by you or, where the law allows, by someone legally authorized to decide for you.
You can keep asking questions during the study, you are told of new information that matters, and you can choose to leave at any time.
Informed consent
Before you join, the study team explains what taking part involves — its purpose, what happens, the risks and possible benefits — and answers your questions, so you can decide freely. Consent is usually recorded on a form (the informed consent form, ICF) signed by you or, where the law allows, by someone legally authorized to decide for you.
You can keep asking questions during the study, you are told of new information that matters, and you can choose to leave at any time.
Explained by clinicaltrials.gg, not part of the registry record. The study team decides who can take part.
additive CAD/CAM manufacturing of dental restorations by 3D printing
Procedure: Onlay manufactured by 3D printing
subtractive CAD/CAM manufacturing of dental restorations by milling
Procedure: onlay manufactured by milling
indirect restorations for treating mutilated molars manufactured by CAD/CAM subtractive technique
indirect restorations for treating mutilated molars manufactured by CAD/CAM additive technique
Marginal and internal fit.
three-dimensional digital evaluation by triple scan protocol in microns
Time frame: Immediate after treatment
clinical functional evaluation .
clinical functional evaluation following the FDI criteria by clinical examination performed by trained investigators
Time frame: one year
Plan to share: No
No publications or documents are linked to this record.
Started Sep 2024 (actual). Primary completion is estimated for Dec 2026, 26 months after the start.
Of 470 non-industry interventional studies with no phase under Dental Caries, half reached primary completion within 15 months of starting (the median), counting those still running; a quarter within 7 and three quarters within 30. This study's planned 26 months is above that.
Counting every sponsor, half of 503 studies reached it within 15 months; a quarter within 7 and three quarters within 29.
How these figures are worked out, and which studies are left out of them.
Eligibility is decided by the study team. Share this record with your doctor or contact the team directly.
No contact was published for this record. The registry link below has the sponsor’s details.
Get an email when the registry record changes — status, dates, results — or when someone posts here.
Sign in to followQuestions and observations about this study, from anyone following it. Not medical advice, and not a channel to the study team — their contact details are on the registry record.
Sign in to join the discussion. Reading takes no account; posting does. You choose a display name, and a pseudonym is the default.
Nothing here yet. If you are running this trial, taking part in it, or weighing whether to, this is the place to say so.