An observational study in Contracture Joint, sponsored by Hangang Sacred Heart Hospital. Not yet recruiting. Open to participants aged 18 Years to 75 Years. Per ClinicalTrials.gov, last updated 2023-05-31.
Sponsored by Hangang Sacred Heart Hospital · Observational
In burn patients, joint contracture is a common complication caused by hypertrophic scars, necessitating accurate evaluation and diagnosis of the degree of disability and functional deterioration. A standard goniometer based on the American Medical Association (AMA) guidelines for measuring joint range of motion (ROM) is the gold standard for evaluating musculoskeletal diseases. However, the handheld goniometer is highly dependent on the skill and experience of the measurer. Recently, a marker-based system for accurate ROM measurement has been demonstrated in clinical evaluation. This study investigated the reliability and validity of the marker-based system for evaluation of joint ROM in burn patients.
Inclusion criteria were as follows: male or female patients between 18 and 75 years of age, partial or full-thickness burns that healed spontaneously or required skin grafting, and limited joint ROM in the upper extremities caused by burns. Exclusion criteria were limited joint ROM due to severe osteoarthritis or rheumatoid arthritis, congenital defects, structural disease, amputation, central or peripheral nervous system injuries, difficulty in voluntary decision-making due to cognitive impairment, or a history of orthopaedic surgery due to fracture.
The experimentals tried to compare the validity and reliability of a marker-based system and AMA methods for the burn patient with joint contracture of upper extremities.
In burn patients, joint contracture is a common complication caused by hypertrophic scars, necessitating accurate evaluation and diagnosis of the degree of disability and functional deterioration. A standard goniometer based on the American Medical Association (AMA) guidelines for measuring joint range of motion (ROM) is the gold standard for evaluating musculoskeletal diseases. However, the handheld goniometer is highly dependent on the skill and experience of the measurer. Recently, a marker-based system for accurate ROM measurement has been demonstrated in clinical evaluation. This study investigated the reliability and validity of the marker-based system for evaluation of joint ROM in burn patients.
After three familiarisation trials for ROM measurement, the evaluation procedure was initiated on the participant's dominant side. A standard goniometer was used to measure ROM and increments were marked. The measurement position was the same as that used in the standard Korean range of motion protocol (KRSP). One examiner measured aROM for flexion, extension, abduction, adduction, external rotation, and internal rotation at a neutral position using a stainless-steel goniometer (JAMAR Co., Pakistan). The aROM was measured under the instruction that the subjects should move their arms as far as possible.
For ROM evaluation in upper extremities, 22 reflective markers were attached to the patient's body before measurement and markers were tracked using eight infrared cameras. Prior to the test, a static calibration test was performed in a neutral position. A skeleton model was obtained directly from the Motive2.1 (the unified software platform of OptiTrack®) for the data gathered by the OptiTrack® system (NaturalPoint, Inc., Corvallis, OR, USA). The ROM of the shoulder, elbow, and wrist was measured sequentially using a dynamic view. The marker trajectories allowed estimation of the joint centres and definition. The joint centres were calculated from optical motion capture data, according to the definitions of Visual3D (C-Motion, Inc., Germantown, MD, USA), a widely used software tool for 3D biomechanical research.
After evaluating the ROM of the upper extremity joint using a goniometer and optical motion capture system (session 1), re-measurement was performed 2 days later (session 2). Markers were positioned by the same observer in both sessions for all the participants.
All statistical analyses were performed using SPSS version 23 (IBM Corp., Armonk, NY, USA). The mean ROM and standard deviation were calculated. An independent t-test was used to compare inter-method differences. For intra-rater reliability, two tests were compared for each measurement. Relative reliability was assessed using the intraclass correlation coefficient (ICC) and ICC interpretation was based on the Fleiss guidelines. Statistical significance was set as P \< 0.05.
who had developed joint contractures in the shoulder, elbow or wrist due to hypertrophic scars after thermal injury were enrolled in this study
Exclusion Criteria:
Inclusion criteria were as follows: male or female patients between 18 and 75 years of age, partial or full-thickness burns that healed spontaneously or required skin grafting, and limited joint ROM in the upper extremities caused by burns.
range of motion of joint
For ROM evaluation in upper extremities, 22 reflective markers were attached to the patient's body before measurement and markers were tracked using eight infrared cameras. Prior to the test, a static calibration test was performed in a neutral position. A skeleton model was obtained directly from the Motive2.1 (the unified software platform of OptiTrack®) for the data gathered by the OptiTrack® system (NaturalPoint, Inc., Corvallis, OR, USA).The ROM of the shoulder, elbow, and wrist was measured sequentially using a dynamic view. The marker trajectories allowed estimation of the joint centres and definition (Figure 1). The joint centres were calculated from optical motion capture data, according to the definitions of Visual3D (C-Motion, Inc., Germantown, MD, USA), a widely used software tool for 3D biomechanical research .
Time frame: 2 days
AMA evaluation
A standard goniometer was used to measure ROM and increments were marked. The measurement position was the same as that used in the standard Korean range of motion protocol (KRSP). One examiner measured aROM for flexion, extension, abduction, adduction, external rotation, and internal rotation at a neutral position using a stainless-steel goniometer (JAMAR Co., Pakistan). The aROM was measured under the instruction that the subjects should move their arms as far as possible.
Time frame: 2 days
No study locations are listed for this record.
Plan to share: No
This study is not yet recruiting, as verified in May 2023. You cannot join it, but the record below documents what was studied.
Get an email when the registry record changes — status, dates, results — or when someone posts here.
Sign in to followQuestions and observations about this study, from anyone following it. Not medical advice, and not a channel to the study team — their contact details are on the registry record.
Sign in to join the discussion. Reading takes no account; posting does. You choose a display name, and a pseudonym is the default.
Nothing here yet. If you are running this trial, taking part in it, or weighing whether to, this is the place to say so.
Hangang Sacred Heart Hospital