ClinicalTrials.gg
RecruitingNCT05776030Updated Nov 18, 2026

Multi-speed Ergonomic Wheelchair

An interventional study of Single Speed Ergonomic Wheelchair and Multi-Speed Ergonomic Wheelchair in Spinal Cord Diseases and Spinal Cord Injuries, sponsored by VA Office of Research and Development. Recruiting at 1 site in United States. Open to participants aged 18 Years and older. Per ClinicalTrials.gov, last updated 2026-11-18.

Primary conditionSpinal Cord InjuriesRegistry: Spinal Cord DiseasesReclassifiedWhy we changed it
Registry
Spinal Cord Diseases — the first condition term the registry derived for this study.
ClinicalTrials.gg
Spinal Cord Injuries
Why
  1. The study's listed conditions name Spinal Cord Injuries, a narrower term within Spinal Cord Diseases.
Confidence
High: the new condition is named in the study's own listed conditions. Of 351 hand-checked studies reclassified this way, 68% were exactly right and 84% in the right disease family; the registry's first term was right for 5% (measured 2026-10-21). How we classify →
Wrong?
Tell us the study's main condition →

Sponsored by VA Office of Research and Development · Not applicable, Interventional, and Basic science

How we know

From the registry’s dates

  • Started Jul 2024; still recruiting 2 years 4 months later.

Help build ClinicalTrials.gg — short surveys, remote interviews or testing, in your language. Take part →

Phase
Not applicable
Study type
Interventional
Enrollment
30
Allocation
Randomized
Ages
18 Years and older
Sex
All
01

Where this study stands

Counted across the records on this site · 2026-11-22

Among 76 studies in Spinal Cord Injuries by VA Office of Research and Development — 17 open to participants now, 18 under way, 1 of them phase 3. Spinal Cord Injuries · VA Office of Research and Development.

Planned enrollment
22nd of 69
30 · median 20
Started
2024
with 3 others
No phase
52 of 76
14 open now
Primary completion
2026-12
later than 1 of 17 live
Registered
64th of 76
by date

Among the 76 studies in Spinal Cord Injuries by VA Office of Research and Development, this one is the 22nd largest by planned enrollment of the 69 interventional ones that give a count, is one of 4 that started in 2024, is one of 52 with no phase, reaches primary completion later than 1 of the 17 other live ones, and was the 64th registered.

Spinal Cord Injuries

2,032 studies on the registry are indexed under Spinal Cord Injuries; 542 are open to participants now.

Browse Spinal Cord Injuries studies →

Open to participants now

17 of the 76 studies in Spinal Cord Injuries by VA Office of Research and Development are open now, in 1 country. Recruiting first, the newest first:

11 more — sign in →

By country, each count listing its studies:

All 17 open studies →

Where they have run

Who these studies take

Of the 374 Spinal Cord Injuries studies recruiting now, 167 (45%) set no upper age limit and 156 (42%) stop at 75 or younger; 40 take children under 18; 52 take healthy volunteers.

This study: 18 Years and older · all sexes · no healthy volunteers.

The full table on the hub →

This tab as a report to print or save as PDF → With an account.

Was this useful?
Get alerts for this landscapeDownload CSVNarrow it in search →With an account: a weekly mail of what changed among 76 studies in Spinal Cord Injuries by VA Office of Research and Development, or all of them as a file.
02

Study summary

Over one million Americans rely on their upper extremities for manual wheelchair propulsion. Shoulder overuse injuries are prevalent among manual wheelchair users and these injuries often result in shoulder pain. Severe shoulder pain can lead some wheelchair users to transition from manual to powered mobility, complicating transportation, and reducing independence in activities of daily living. This project will expand the understanding of a new wheelchair design that allows better positioning of the hand rims and allows for different gearing. The investigators will study steady-state propulsion efficiency with different gear ratios and develop a new system with multiple gear ratios. The advanced gearing will allow for a low gear when initiating movement, going uphill, or when moving over carpet, and then a higher gear option for movements on hard flat level terrain. This system has the potential to dramatically improve shoulder ergonomics and reduce pain in many future manual wheelchair users.

Read the detailed description

The Minneapolis Adaptive Design \& Engineering (MADE) Program has recently developed ergonomic wheelchairs that use a chain drive system to place the hand rims in an ergonomic position while keeping the rear drive wheels posterior for a stable base of support. The investigators' ergonomic wheelchair's forward hand rim positioning allows for a more efficient push along a longer arc length of the hand rims, without sacrificing wheelchair stability or shoulder ergonomics.

The ergonomic wheelchair's chain drive allows for individualized gear ratios to suit each wheelchair user's needs; however, the investigators have not yet studied this feature. Thus, the objectives of this proposed work are to (1) explore the effect of different gearing options on Veteran wheelchair user steady-state propulsion efficiency, and (2) develop a multi-speed ergonomic wheelchair allowing for lower gears during difficult situations (initiating movements, moving over carpeting) and higher gears for steady-state movements on flat surfaces.

The investigators will recruit 18 Veterans with SCI/D to participate in a cross-over study of the ergonomic wheelchair with three gear ratios (3:2 (low), 1:1 (normal), and 2:3 (high)). The investigators will use two measurement approaches to assess efficiency: (1) work done at the pushrim hubs to move the wheelchair in Joules (J), and (2) the measurement of energy (kCal: kilocalories) expended by the Veteran to move the wheelchair. Similar to miles per gallon in a car, the investigators will calculate distances traveled in meters (m) per energy units (m/J and m/kCal) as the measures of efficiency. The investigators hypothesize that (H1) Higher gear ratios will be more efficient (higher m/J) on hard level terrain than lower gear ratios, (H2) Lower gear ratios will be more efficient (higher m/J) for inclined terrain than higher gear ratios, (H3) Lower gear ratios will be more efficient (higher m/J) for carpeted terrain than higher gear ratios, and (H4) Veterans will be more efficient (higher m/kCal) in moving the wheelchair during the 6MPT on hard level terrain when using higher gear ratios compared with lower gear ratios. In addition to steady-state measures, the investigators will also explore the effects of gearing on propulsion initiation and expect lower gear ratios will be beneficial for initiation on all terrains.

The investigators will then recruit 12 Veterans to try a new multi-speed ergonomic wheelchair that has two hand rims per side - one in a lower gear and the other in a higher gear. The proposed system does not require manual or electric shifting between gears. Instead, the Veteran can use the lower gear to initiate movements and then "shift on the fly" by simply pushing on the other hand rim. Veterans will return to the laboratory and provide feedback as the design is iteratively improved. Quantitative and qualitative data will be captured to determine feasibility of this approach and to promote commercialization of the multi-speed ergonomic wheelchair.

Throughout the project, the team will work closely with VA's Technology Transfer Program and the TechLink Center to find an industry partner for this work. The investigators' team has demonstrated the ability to develop rehabilitation products into commercially licensed products. The investigators will follow a similar stage-gate process in this development project to maximize the chances for successful commercialization of the modular multi-speed ergonomic wheelchair.

03

Conditions studied

  • Spinal Cord Diseases
  • Spinal Cord Injuries

Browse trials for

Keywords

  • Wheelchairs
  • Community Participation
  • Social Participation
  • Ergonomics
  • Self-Help Devices
04

In context

Spinal Cord Injuries Reclassified

2,032 studies on the registry are indexed under Spinal Cord Injuries; 542 are open to participants now.

This study's planned enrollment of 30 is above the median of 24 across 1,639 interventional studies indexed under Spinal Cord Injuries.

Browse Spinal Cord Injuries studies →

Lead sponsor

VA Office of Research and Development is the lead sponsor of 1,774 studies on the registry; 394 are open to participants now.

Of its 213 completed or terminated interventional studies of FDA-regulated products, 185 (87%) have results posted.

Compared within Spinal Cord Injuries, this study's primary condition as ClinicalTrials.gg classifies it; the registry's first condition term is Spinal Cord Diseases. The counts are of registry records indexed under each term, refreshed daily. How we classify →

05

Who can participate

Ages eligible
18 Years and older
Sexes eligible
All
Accepts healthy volunteers
No

Eligibility criteria

Inclusion Criteria:

Inclusion criteria:

  • Uses manual wheelchair daily
  • Mass less than 125 kg
  • Age 18 or older
  • Decisional competency to provide consent and cognitive ability to participate fully in study procedures
  • Body size appropriate to fit the wheelchairs (16" and 18" seat widths)

Exclusion Criteria:

Exclusion criteria:

  • Sitting surface pressure injuries
  • Flap procedure to address pressure injury less than one year earlier
  • Unable to obtain clinically acceptable seating system for study wheelchairs
  • Not able to propel a manual wheelchair
  • Upper extremity or spine issues which would make this study unsafe, such as recent surgeries, fractures, tendon tears or nerve impingement (will be assessed by SCI physician - Dr. Byron Eddy)
  • Medical conditions such as cardiovascular disease, pulmonary disease, or other conditions that would make the study procedures unsafe (will be assessed by SCI physician - Dr. Byron Eddy)
06

Study design

Phase
Not applicable
Primary purpose
Basic science
Allocation
Randomized
Intervention model
Crossover assignment
Masking
None (open label)
Enrollment
30 participants (estimated)

Study arms

  • Experimental
    Ergonomic Wheelchair Gear Testing

    This study has two aims. The first aim will have participants use a single speed ergonomic wheelchair to test three different gear ratio set ups (3:2, 1:1, 2:3).

    Device: Single Speed Ergonomic Wheelchair

  • Experimental
    Multispeed Testing - Ergonomic Wheelchair

    The second aim will have participants compared to the participant's standard wheelchair to a multi-speed (2 gear ratios) ergonomic wheelchair.

    Device: Multi-Speed Ergonomic Wheelchair

  • Experimental
    Multispeed Testing - Standard Wheelchair

    The second aim will have participants compared to the participant's standard wheelchair to a multi-speed (2 gear ratios) ergonomic wheelchair.

    Device: Multi-Speed Ergonomic Wheelchair

Interventions

  • DeviceSingle Speed Ergonomic Wheelchair

    Ergonomic wheelchair. The ergonomic wheelchair was developed by the MADE program and has anterior placed hand rims that are connected with a bicycle chain. In Aim 1, Participants will use the ergonomic wheelchair to test 3 different gear ratios. 1. 2:3 2. 1:1 3. 3:2

  • DeviceMulti-Speed Ergonomic Wheelchair

    The multi-speed ergonomic wheelchair will be developed by the MADE program and will use a two-hand rim design so the participant can change gears by changing hand rims.

07

What researchers measure

Primary outcomes

  1. 20 Meter Push Test - level surface, Gear Ratio 1:1

    Individuals self-propel a wheelchair 20 meters at their chosen pace

    Time frame: up to 4 weeks after enrollment

  2. 20 Meter Push Test - level surface, Gear Ratio 2:3

    Individuals self-propel a wheelchair 20 meters at their chosen pace

    Time frame: up to 4 weeks after enrollment

  3. 20 Meter Push Test - level surface, Gear Ratio 3:2

    Individuals self-propel a wheelchair 20 meters at their chosen pace

    Time frame: up to 4 weeks after enrollment

  4. 20 Meter Push Test - uphill, Gear Ratio 1:1

    Individuals self-propel a wheelchair 20 meters at their chosen pace

    Time frame: up to 4 weeks after enrollment

  5. 20 Meter Push Test - uphill, Gear Ratio 2:3

    Individuals self-propel a wheelchair 20 meters at their chosen pace

    Time frame: up to 4 weeks after enrollment

  6. 20 Meter Push Test - uphill, Gear Ratio 3:2

    Individuals self-propel a wheelchair 20 meters at their chosen pace

    Time frame: up to 4 weeks after enrollment

  7. 20 Meter Push Test - Carpet, Gear Ratio 1:1

    Individuals self-propel a wheelchair 20 meters at their chosen pace

    Time frame: up to 4 weeks after enrollment

  8. 20 Meter Push Test - Carpet, Gear Ratio 2:3

    Individuals self-propel a wheelchair 20 meters at their chosen pace

    Time frame: up to 4 weeks after enrollment

  9. 20 Meter Push Test - Carpet, Gear Ratio 3:2

    Individuals self-propel a wheelchair 20 meters at their chosen pace

    Time frame: up to 4 weeks after enrollment

  10. 6 Minute Push Test - Usual Wheelchair, Temporal/Spatial

    Distance (m) and number of pushes will be collected during this test.

    Time frame: up to 4 weeks after enrollment

  11. 6 Minute Push Test - Gear Ratio 1:1, Temporal/Spatial

    Distance (m) and number of pushes will be collected during this test.

    Time frame: up to 4 weeks after enrollment

  12. 6 Minute Push Test - Gear Ratio 2:3, Temporal/Spatial

    Distance (m) and number of pushes will be collected during this test.

    Time frame: up to 4 weeks after enrollment

  13. 6 Minute Push Test - Gear Ratio 3:2, Temporal/Spatial

    Distance (m) and number of pushes will be collected during this test.

    Time frame: up to 4 weeks after enrollment

  14. 6 Minute Push Test - Usual Wheelchair, Metabolic (kCal/min)

    Oxygen Uptake (VO2: L/min), Carbon dioxide production (VCO2: L/min), and respiratory quotient (RQ) will all be collected using a COSMED K5 portable metabolic measurement system These measures are used for calculating kCal/min = (\[1.1 \* RQ\] + 3.9) \* VO2

    Time frame: up to 4 weeks after enrollment

  15. 6 Minute Push Test - Gear Ratio 1:1, Metabolic (kCal/min)

    Oxygen Uptake (VO2: L/min), Carbon dioxide production (VCO2: L/min), and respiratory quotient (RQ) will all be collected using a COSMED K5 portable metabolic measurement system These measures are used for calculating kCal/min = (\[1.1 \* RQ\] + 3.9) \* VO2

    Time frame: up to 4 weeks after enrollment

  16. 6 Minute Push Test - Gear Ratio 2:3, Metabolic (kCal/min)

    Oxygen Uptake (VO2: L/min), Carbon dioxide production (VCO2: L/min), and respiratory quotient (RQ) will all be collected using a COSMED K5 portable metabolic measurement system These measures are used for calculating kCal/min = (\[1.1 \* RQ\] + 3.9) \* VO2

    Time frame: up to 4 weeks after enrollment

  17. 6 Minute Push Test - Gear Ratio 3:2, Metabolic (kCal/min)

    Oxygen Uptake (VO2: L/min), Carbon dioxide production (VCO2: L/min), and respiratory quotient (RQ) will all be collected using a COSMED K5 portable metabolic measurement system These measures are used for calculating kCal/min = (\[1.1 \* RQ\] + 3.9) \* VO2

    Time frame: up to 4 weeks after enrollment

  18. Wheelchair Skills Test Version 5.2 - Usual Wheelchair

    The WST is used for objective evaluation of manual wheelchair skills. It includes 32 skills that are rates advanced pass/highly proficient (3 points), pass (2 points), pass with difficulty (1 point), or fail (0 points). The WST covers a wide variety of skills that manual wheelchair users experience in everyday life including inclines, side slopes, soft surface, thresholds, gaps, curbs, obstacle avoidance, and wheelies.

    Time frame: up to 4 weeks after enrollment

  19. Wheelchair Skills Test Version 5.2 - Multispeed Wheelchair

    The WST is used for objective evaluation of manual wheelchair skills. It includes 32 skills that are rates advanced pass/highly proficient (3 points), pass (2 points), pass with difficulty (1 point), or fail (0 points). The WST covers a wide variety of skills that manual wheelchair users experience in everyday life including inclines, side slopes, soft surface, thresholds, gaps, curbs, obstacle avoidance, and wheelies.

    Time frame: up to 4 weeks after enrollment

  20. 600 Meter Course - Usual Wheelchair, Timed (seconds)

    The distance of 600 meters is used clinically to assess community ambulation ability and can be used to determine if a power wheelchair is needed. The 600 meter course will include several turns, carpeting, and starting/stopping the wheelchair. Participants will be instructed to complete the course at a comfortable pace and will be timed (s).

    Time frame: up to 4 weeks after enrollment

  21. 600 Meter Course - Multispeed Wheelchair, Timed (seconds)

    The distance of 600 meters is used clinically to assess community ambulation ability and can be used to determine if a power wheelchair is needed. The 600 meter course will include several turns, carpeting, and starting/stopping the wheelchair. Participants will be instructed to complete the course at a comfortable pace and will be timed (s).

    Time frame: up to 4 weeks after enrollment

  22. 600 Meter Course - Usual Wheelchair, Rating of Perceived Exertion (RPE)

    The distance of 600 meters is used clinically to assess community ambulation ability and can be used to determine if a power wheelchair is needed. The 600 meter course will include several turns, carpeting, and starting/stopping the wheelchair. Participants will be instructed to complete the course at a comfortable pace and RPE will be asked at the end of the course.

    Time frame: up to 4 weeks after enrollment

  23. 600 Meter Course - Multispeed Wheelchair, Rating of Perceived Exertion (RPE)

    The distance of 600 meters is used clinically to assess community ambulation ability and can be used to determine if a power wheelchair is needed. The 600 meter course will include several turns, carpeting, and starting/stopping the wheelchair. Participants will be instructed to complete the course at a comfortable pace and RPE will be asked at the end of the course.

    Time frame: up to 4 weeks after enrollment

  24. Mobility-Related ADL - Usual Wheelchair, Timed (seconds)

    This is a standardized, timed circuit of simulated mobility-related ADL tasks to simulate a morning ADL routine.

    Time frame: up to 4 weeks after enrollment

  25. Mobility-Related ADL - Multispeed Wheelchair, Timed (seconds)

    This is a standardized, timed circuit of simulated mobility-related ADL tasks to simulate a morning ADL routine.

    Time frame: up to 4 weeks after enrollment

  26. Mobility-Related ADL - Usual Wheelchair, Independency

    This is a standardized, timed circuit of simulated mobility-related ADL tasks to simulate a morning ADL routine. All ICF activity-based measures of function in a wheelchair. Independence for tasks will be scored using the Function Everyday with a Wheelchair Capacity scoring from 0 (dependent) to 3 (independent).

    Time frame: up to 4 weeks after enrollment

  27. Mobility-Related ADL - Multispeed Wheelchair, Independency

    This is a standardized, timed circuit of simulated mobility-related ADL tasks to simulate a morning ADL routine. All ICF activity-based measures of function in a wheelchair. Independence for tasks will be scored using the Function Everyday with a Wheelchair Capacity scoring from 0 (dependent) to 3 (independent).

    Time frame: up to 4 weeks after enrollment

  28. QUEST 2.0 - Usual Wheelchair

    The QUEST evaluates how satisfied one is with an assistive device.

    Time frame: up to 4 weeks after enrollment

  29. QUEST 2.0 - Multispeed Wheelchair

    The QUEST evaluates how satisfied one is with an assistive device.

    Time frame: up to 4 weeks after enrollment

08

Study locations

1 of 1 sites recruiting
09

References and documents

Individual participant data

Plan to share: No

No publications or documents are linked to this record.

10

Timeline

1 registry update since Sep 25, 2026
ElapsedEstimatedEstimated, not yet reachedSimilar studies: half by the dot; the band is the middle halfHalf of similar studies reached it by the dot; the band is the middle half, from a quarter to three quarters

Started Jul 2024 (actual). Primary completion is estimated for Dec 2026, 29 months after the start.

Of 791 non-industry interventional studies with no phase under Spinal Cord Injuries, half reached primary completion within 37 months of starting (the median), counting those still running; a quarter within 18 and three quarters within 65. This study's planned 29 months is below that.

Counting every sponsor, half of 840 studies reached it within 36 months; a quarter within 17 and three quarters within 64.

How these figures are worked out, and which studies are left out of them.

Registered
Mar 8, 2023
First posted
Mar 20, 2023
StartActual
Jul 18, 2024
Primary completionEst.
Dec 31, 2026
CompletionEst.
Mar 31, 2027
Last update
Nov 18, 2026
What these dates mean
Start.
When the first participant enrolled; while estimated, when the study expects to open to recruitment.
Primary completion.
When the last participant was examined or treated to collect data for the study's main question, its primary outcome. A study that stopped early gives the date its data collection stopped.
Completion.
When the last participant's last visit took place, for every outcome, secondary ones and side effects included: the end of the study. Often later than primary completion, sometimes the same day.
Actual and Est.
Actual means the registry says the date has happened. Est. (estimated) is a date the sponsor plans or expects. It can still move, and the sponsor is expected to change it to actual once it has passed.
Minor edits
Nothing that changes what the study is or who can join. Edited: identifiers
1 update, last Nov 18, 2026
Show all 1 update
  1. Nov 18, 2026
    Minor edits only
    + 1 other change: identifiers

From the registry record's own update history. This site started tracking changes on Sep 25, 2026; for anything earlier, see the record history on ClinicalTrials.gov ↗

11

Registry details

Key details

Study ID
NCT05776030
Responsible party
Sponsor
First posted
Mar 20, 2023
Start date
Jul 18, 2024
Primary completion
Dec 31, 2026 (estimated)
Completion
Mar 31, 2027 (estimated)
Last update
Nov 18, 2026

Study contacts

John M Looft, PhD
Contact
john.looft@va.gov
(612) 725-2001
Alexandria N Richardson, MS
Contact
Alexandria.Richardson@va.gov
(612) 467-4951
John M Looft, PhD
principal investigator · Minneapolis VA Health Care System, Minneapolis, MN

Oversight

Data monitoring committee
No
FDA-regulated drug
No
FDA-regulated device
Yes
View the source record on ClinicalTrials.gov ↗

Interested in this study?

Eligibility is decided by the study team. Share this record with your doctor or contact the team directly.

Contact study team

Follow this study

Get an email when the registry record changes — status, dates, results — or when someone posts here.

Sign in to follow

Discussion

Questions and observations about this study, from anyone following it. Not medical advice, and not a channel to the study team — their contact details are on the registry record.

Sign in to join the discussion. Reading takes no account; posting does. You choose a display name, and a pseudonym is the default.

Nothing here yet. If you are running this trial, taking part in it, or weighing whether to, this is the place to say so.

Start the discussion