An interventional study of additive plating group and subtractive plating group in Anterior Mandibular Fracture, sponsored by Tanta University. Completed at 1 site in Egypt. Open to participants aged 16 Years to 60 Years. Per ClinicalTrials.gov, last updated 2025-12-04.
Sponsored by Tanta University · Not applicable, Interventional, and Treatment
This study aims to compare the mechanical properties, including tensile strength, shear strength, and flexural strength, as well as the clinical outcomes of additive and subtractive manufacturing techniques used to fabricate custom-made plates for the fixation of interforaminal mandibular fractures. A total of 16 patients were included and allocated into two groups: one treated using plates fabricated with the additive manufacturing technique and the other with the subtractive manufacturing technique. Mechanical performance was evaluated using standardized biomechanical testing, while clinical outcomes were assessed during scheduled postoperative follow-up visits. The objective of the study is to determine which fixation approach provides superior biomechanical performance and favorable clinical healing outcomes.
This randomized clinical study included 18 patients who were assessed for eligibility. Two patients were excluded-one did not meet the inclusion criteria and another declined participation-leaving a final sample of 16 patients who were randomly allocated into two equal groups (n=8 per group). All included patients were followed throughout the entire study period, and none were lost to follow-up.
Both study groups demonstrated comparable baseline characteristics with no statistically significant differences regarding age, sex distribution, trauma side, cause of injury, type of fracture, and operative time. All surgical procedures were performed using standardized operative protocols, and postoperative evaluations were conducted at fixed intervals.
Clinical outcomes included wound healing status, postoperative edema, infection, and wound dehiscence. Functional performance was evaluated through maximum mouth opening measurements and patient-reported outcomes involving occlusion and self-chewing ability. Radiographic and mechanical assessments were also performed, including tensile strength, shear strength, and flexural bending tests for the fixation systems used in each group.
Across the follow-up period, both groups showed satisfactory wound healing, absence of infection or dehiscence, progressive improvement in mouth opening, and gradual restoration of occlusal stability and chewing function, with no significant intergroup differences in clinical parameters. Mechanical testing demonstrated significant differences between the two fixation systems.
All collected data were statistically analyzed, and outcomes were reported in accordance with CONSORT guidelines.
2,261 studies on the registry are indexed under Fractures, Bone; 325 are open to participants now.
This study's enrollment of 16 is below the median of 69 across 1,482 interventional studies indexed under Fractures, Bone.
Browse Fractures, Bone studies →Tanta University is the lead sponsor of 963 studies on the registry; 304 are open to participants now.
Of its 16 completed or terminated interventional studies of FDA-regulated products, 0 (0%) have results posted.
Counted across the registry records on this site, refreshed daily.
Exclusion Criteria:
Additive manufacturing typically describes any process where material is gradually added, layer by layer, to form a final product. The term is often used interchangeably with 3D printing and rapid prototyping, although rapid prototyping can also involve other techniques beyond additive methods
Device: additive plating group
In subtractive manufacturing, objects are created by progressively removing material from a solid block or sheet through processes such as cutting, drilling, boring, or grinding. While these processes can be performed manually, they are more commonly executed using computer numeric control (CNC). CNC machining is the most widely used subtractive manufacturing process today
Device: subtractive plating group
Additive manufacturing is the process of creating parts by joining materials based on 3D model data, typically layer by layer, in contrast to subtractive and formative manufacturing methods. While most of the global activity in additive manufacturing currently involves polymer-based systems, there has been increasing interest and activity in fabricating metallic parts
In CNC machining, cutting tool removes material to achieve the desired geometry. The process involves using CAD to create the model to be machined and CAM to provide instructions to the CNC machine on how to remove the material. There are three major machining processes for material removal based on 3D models: turning, drilling, and milling. Additional subtractive manufacturing techniques, such as laser cutting, waterjet cutting, electrical discharge machining, and plasma cutting, are typically used for 2D machining
Tensile Strength
Tensile strength will be measured using a universal testing machine (Instron) to evaluate the resistance of each plate to tensile forces according to standardized biomechanical testing protocols. Unit of Measure: Newton (N) Measurement Tool: Instron Universal Testing Machine.
Time frame: After fabrication of the plates (baseline biomechanical assessment)
Shear Strength
Shear strength will be tested using the Instron universal testing machine to determine the resistance of the plate to shear loading. Time Frame: After fabrication of the plates (baseline biomechanical assessment) Unit of Measure: Newton (N) Measurement Tool: Instron Universal Testing Machine.
Time frame: Immediately after fixation (within 24 hours)
Outcome Measure
Title: Overall Mechanical Stability Description: Overall biomechanical stability will be evaluated based on combined tensile, shear results. Time Frame: Within 24 hours after surgical fixation Unit of Measure: Stability index (unitless)
Time frame: Immediately after fixation (within 24 hours)
Mouth Opening Measurement
Maximum inter-incisal distance will be measured using a digital caliper to assess functional recovery and detect any restrictions. Unit of Measure: Millimeters (mm) Measurement Tool: Digital caliper
Time frame: 1 week, 2 weeks, 1 month, 3 months, and 6 months after surgery
Wound Healing Score
Wound healing will be assessed using the Landry, Turnbull, and Howley Wound Healing Index, which evaluates tissue color, bleeding on palpation, granulation tissue, and overall appearance. Unit of Measure: Score (0-5 scale) Measurement Tool: Landry, Turnbull \& Howley Index (clinical scale)
Time frame: 1 week, 2 weeks, 1 month, 3 months, and 6 months after surgery
Postoperative Edema Measurement
Edema will be measured using standardized linear facial measurements (tragus-pogonion and gonion-pogonion distances) to quantify postoperative swelling. Unit of Measure: Millimeters (mm) Measurement Tool: Facial linear measurement with ruler/caliper.
Time frame: 1 week, 2 weeks, 1 month, 3 months, and 6 months after surgery
Postoperative Infection Assessment
Infection will be evaluated using the CDC Surgical Site Infection (SSI) criteria, including redness, swelling, warmth, purulent discharge, fever \>38°C, and localized tenderness at the surgical site.Unit of Measure: Presence or absence (Yes/No) Measurement Tool: CDC SSI Diagnostic Criteria (clinical assessment)
Time frame: 1 week, 2 weeks, 1 month, 3 months, and 6 months after surgery
Plan to share: No
No publications or documents are linked to this record.
This study is completed, as verified in Nov 2025. You cannot join it, but the record below documents what was studied.
Get an email when the registry record changes — status, dates, results — or when someone posts here.
Sign in to followQuestions and observations about this study, from anyone following it. Not medical advice, and not a channel to the study team — their contact details are on the registry record.
Sign in to join the discussion. Reading takes no account; posting does. You choose a display name, and a pseudonym is the default.
Nothing here yet. If you are running this trial, taking part in it, or weighing whether to, this is the place to say so.
Tanta University