An interventional study of Preformed stainless steel crown. and Preformed zirconia crown in Dental Restoration, sponsored by Mansoura University. Status unknown at 1 site in Egypt. Open to participants aged 4 Years to 7 Years, including healthy volunteers. Per ClinicalTrials.gov, last updated 2024-06-10.
Sponsored by Mansoura University · Not applicable, Interventional, and Other
This study will be conducted to:
Evaluate and compare the clinical success, periodontal changes, and wear of antagonist teeth for three types of prefabricated crowns in primary molars: BioFlx crowns, Zirconia crowns, and Stainless Steel crowns.
A randomized controlled clinical trial with three parallel groups, will be set up and reported according to the revised Consolidated Standards of Reporting Trials statement. The study will be conducted on 51 children with 51 molars aged between 4 and 7 years with a lower primary molar indicated for crown restoration. The children will be selected from the Pediatric Dental Clinic, Faculty of Dentistry, Mansoura University. They will be randomly divided into three equal groups (17 molars/each). Sequence generation and concealment will be done by a biostatistician who is not involved in the study. Group I (control group) will include stainless steel crowns, group II (study group) will include Zirconia crowns, group III (study group) will include BioFlx crowns. After obtaining the written consent form from the parents or guardians, the children will be randomly enrolled, and teeth will be assigned to the groups to receive the selected crowns. Clinical evaluation will be done concerning crown retention, color stability, secondary caries, periodontal changes, and wear of the opposing natural enamel. All crowns will be evaluated at the 3rd, 6th, 12th, and 18th months.
Mansoura University is the lead sponsor of 1,115 studies on the registry; 184 are open to participants now.
Of its 9 completed or terminated interventional studies of FDA-regulated products, 0 (0%) have results posted.
Counted across the registry records on this site, refreshed daily.
Go through the criteria one by one — yes, no or not sure — and take the list to your doctor or the study team. Kept in this browser only.
Exclusion Criteria:
It will include 17 molars that will be restored by a stainless steel crown.
Other: Preformed stainless steel crown.
It will include 17 molars that will be restored by Zirconia crowns.
Other: Preformed zirconia crown
It will include 17 molars that will be restored by BioFlx crowns.
Other: Preformed BioFlx crown
A well-fitted preformed stainless-steel crown will be chosen by measuring the mesiodistal dimension of the tooth or its contralateral counterpart, using a graduated periodontal probe for guidance. (6) Tooth preparation will be carried out with #835 diamond fissure bur to reduce occlusal surface up to 1 to 1.5 mm. The interproximal reduction will be made mesially and distally using #169 L tapered diamond bur around 0.5 mm to clear the contact area creating a feather edge finish line. The selected crown size will be checked, and a trial fit will be done before cementation. The crown will be cemented using self-cured RMGI luting cement. The excess will be removed, and proper occlusion will be checked.
The material for crown restoration for this group is the preformed zirconia crown. Tooth preparation will be started by occlusal reduction (1 to 1.5 mm) using #835 diamond fissure bur. The interproximal reduction will be done mesially and distally with #169 L tapered diamond bur in such a way that a straight probe passes freely through the contact area. Rounding of line angles will be done and a knife-edge finish margin of the proximal surface will be obtained avoiding any ledge formation. The selected crown will be placed and checked for a passive fit. Consistent firm finger pressure will be applied during cementation with self-cured RMGI luting cement. Finally, crown placement will be checked.
The prefabricated BioFlx crown will be used in this group. A similar-sized preformed crown will be selected. Tooth preparation will be carried out similarly to traditional SSCs with #835 diamond fissure bur for occlusal reduction by 1-1.5 mm including the central groove. The proximal preparation will be done mesially and distally with #169 L tapered diamond bur around 0.5 mm to clear the contact area creating a feather edge finish line. Placement of the crown will be achieved by a snug fit. Crown cementation will be carried out using self-cured RMGI luting cement and the excess cement will be removed using a floss or an explorer. (13) Finally, crown placement will be checked
Crown retention
The crown retention will be measured concerning the proper adaptation of the crown or the complete crown loss according to the following: 0 = present. 1 = absent.
Time frame: After 3, 6,12,18 months
Color stability
The color stability will be evaluated using one crown from the original kit as a standard that will be held up to each crown restoration for color comparison according to the following: 0= Unchanged. 1= Minor deviation from original. 2 = Unacceptable discoloration.
Time frame: After 3, 6,12,18 months
Secondary caries
Secondary caries will be measured according to USPHS by visual inspection with an explorer to inspect if there is evidence of caries with the margin of the crown restoration according to the following: 0 = no caries 1 = caries present
Time frame: After 3, 6, 12,18 months
Gingival Index (Periodontal Changes)
The GI (Gingival index) will be measured by the William Gingival Probe; the values will be recorded according to the following: 0 = normal gingiva 1. = mild inflammation: a slight change in color, slight edema, no bleeding on probing 2. = moderate inflammation: redness, edema, glazing, or bleeding on probing 3. = severe inflammation: marked redness or edema, a tendency toward spontaneous bleeding, and ulceration.
Time frame: After 3, 6, 12 ,18 months
Periodontal Index (Periodontal changes)
The PI (Periodontal Index) will be measured by the William Gingival probe; the values will be recorded according to the following: 0 = no plaque 1= film at the gingival margin and adjacent tooth 2 = moderate accumulation of plaque 3 = abundance of plaque.
Time frame: After 3, 6, 12 ,18 months
Periodontal pocket depth (Periodontal changes)
The PPD will be measured using a manual periodontal probe (UNC. 15 mm) according to the following: The pocket depth will be measured in mesiobuccal, distobuccal, mesiolingual, and distolingual areas. The periodontal probe will be inserted into the gingival sulcus parallel to the longitudinal axis of the tooth and then move in a walking fashion.
Time frame: After 3, 6, 12 ,18 months
Wear of the opposing natural enamel.
To evaluate the wear of the antagonistic natural enamel of the primary molar, alginate impressions will be taken immediately (baseline) and 1 year after cementation of the crowns. The resulting casts will be scanned using a 3D scanner and 3D software that will be used to calculate the maximum amount of linear wear using image superimposition techniques. The occlusal points of the crowns will be recorded in the software for measurements and comparisons, then it will be transformed into Standard Tessellation Language (STL) file format by the software
Time frame: After 12 months
Plan to share: No
No publications or documents are linked to this record.
This study is status unknown, as verified in Jun 2024. You cannot join it, but the record below documents what was studied.
Get an email when the registry record changes — status, dates, results — or when someone posts here.
Sign in to followQuestions and observations about this study, from anyone following it. Not medical advice, and not a channel to the study team — their contact details are on the registry record.
Sign in to join the discussion. Reading takes no account; posting does. You choose a display name, and a pseudonym is the default.
Nothing here yet. If you are running this trial, taking part in it, or weighing whether to, this is the place to say so.