Prospective Evaluation of Strontium in Patients After CardioGen-82 PET MPI Scanning at Two Clinical Sites

This clinical study protocol will use a three tier approach consisting of the following examinations:

• Patient examination with Survey Meter: The patient will first be tested at the clinical sites using a survey meter. In those patients whose radiation count is ≥ 2 times above background count using a standard survey meter, the presence of Sr-82 and/or Sr-85 will be assessed through a quantitative reading from a calibrated portable isotope identifier.
• Patient examination with Portable Isotope Identifier: This examination will be done by use of a portable isotope identifier, which will be supplied by the Sponsor to the study sites. An assessor, independent to the study site and will perform the examination. In those patients whose radiation count is ≥ 2 times above background count using a standard survey meter, the presence of Sr-82 and/or Sr-85 will be assessed through a quantitative reading from a calibrated portable isotope identifier. The reading will be forwarded along with the date of the reading, the date of the patient's CardioGen-82® scan, and the total dose of CardioGen-82® administered to the patient, to an independent medical expert, independent to the study site, who will back-calculate an estimated dose of Sr-82 and/or Sr-85 from these data.
• Patient examination at Oak Ridge National Laboratory: Any patient whose estimated dose of Sr-82 exceeds the specified limit of 0.02 microcuries per mCi Rb-82 administered, and/or whose estimated dose of Sr-85 exceeds the specified limit of 0.2 microcuries per mCi Rb-82 administered, will be asked to travel to Oak Ridge National Laboratory in Tennessee, for accurate whole body scanning. Scan data from Oak Ridge National Laboratories will be analyzed by one or more independent medical experts to accurately back-calculate exposure to Sr-82 and/or Sr-85, and to estimate health hazard for the patient.